Jun 30, 2017 - N/A or N.A. Not Applicable. Ozone Chamber. Vadodara- 390 007. Lembaga Sertifikasi. Produk (BPPT). Weekly 0.5 weekly 0.5 0.5 2008-10-30T11:06:09.000Z weekly 0.5.

• Opara, Aleksandra For many years, biogas was connected mostly with the organic matter decomposition in shallow sediments (e.g., wetlands, landfill gas, etc.). Recently, it has been realized that biogenic methane production is ongoing in many hydrocarbon reservoirs. This research examined microbial methane and carbon dioxide generation from coal. Primus acca software crack site. As original contributions methane production from various coal materials was examined in classical and electro-biochemical bench-scale reactors using unique, developed facultative microbial consortia that generate methane under anaerobic conditions. Facultative methanogenic populations are important as all known methanogens are strict anaerobes and their application outside laboratory would be problematic. Additional testing examined the influence of environmental conditions, such as pH, salinity, and nutrient amendments on methane and carbon dioxide generation.

In 44-day ex-situ bench-scale batch bioreactor tests, up to 300,000 and 250,000 ppm methane was generated from bituminous coal and bituminous coal waste respectively, a significant improvement over 20-40 ppm methane generated from control samples. Chemical degradation of complex hydrocarbons using environmentally benign reagents, prior to microbial biodegradation and methanogenesis, resulted in dissolution of up to 5% bituminous coal and bituminous coal waste and up to 25% lignite in samples tested. Research results confirm that coal waste may be a significant underutilized resource that could be converted to useful fuel.

Rapid acidification of lignite samples resulted in low pH (below 4.0), regardless of chemical pretreatment applied, and did not generate significant methane amounts. These results confirmed the importance of monitoring and adjusting in situ and ex situ environmental conditions during methane production. A patented Electro-Biochemical Reactor technology was used to supply electrons and electron acceptor environments, but appeared to influence methane generation in a • Ritzema, Randall S. 2014-09-01 Increasing demand for scarce water supplies is fueling competition between agricultural production and other municipal and environmental demands, and has heightened the need for effective indicators to measure water performance and support water allocation and planning processes. Water productivity (WP), defined as the ‘ratio of the net benefits from crop, forestry, fishery, livestock, and mixed agricultural systems to the amount of water required to produce those benefits', is one such indicator that has gained prominence, particularly in research-for-development efforts in the developing world. However, though WP is a framework well-suited to systems where water use is directly attributable, particularly via depletion, to definitive benefits, the suitability of the approach becomes questionable when these conditions are not met, such as in multiple use systems with high re-use and non-depleting uses. These factors furthermore make WP highly scale-dependent, complicating comparative studies across scales and systems.

This research forwards ‘aqueous productivity' (AP) as an alternative indicator that addresses some inherent limitations in the WP approach and enhances productivity estimates for water in integrated systems. Like WP, AP is expressed as a ratio of benefit to water volume. However, AP uses a systems approach and is based on the concept that elements within a hydrologic system are linked via water flow interactions, and that those elements either ‘extract' value from associated water flows or ‘infuse' value into them. The AP method therefore calculates the ‘aqueous productivity', a ratio indicating the ‘dissolved' production-related economic value of all downstream uses of an individual water flow, for each inter-element and cross-boundary flow in the system. The AP conceptual framework and analytical methodology are presented.

The method is then applied to two example hydroeconomic systems and compared to equivalent WP analysis. Discussion • Adewumi, Michael A; Ityokumbul, M Thaddeus; Watson, Robert W; Eltohami, Eltohami; Farias, Mario; Heckman, Glenn; Houlihan, Brendan; Karoor, Samata Prakash; Miller, Bruce G; Mohammed, Nazia; Olanrewaju, Johnson; Ozdemir, Mine; Rejepov, Dautmamed; Sadegh, Abdallah A; Quammie, Kevin E; Zaghloul, Jose; Hughes, W Jack; Montgomery, Thomas C 2005-12-31 The objective of this project was to develop a sonic well performance enhancement technology that focused on near wellbore formation damage. In order to successfully achieve this objective, a three-year project was defined. The entire project was broken into four tasks. The overall objective of all this was to foster a better understanding of the mechanisms involved in sonic energy interactions with fluid flow in porous media and adapt such knowledge for field applications.